木工加工棚滅火器配置什么標準?
來源:http://mpmy.cn/ 發布時間:2022-03-14
木工加工棚防火管理規定
Regulations on fire prevention management of woodworking shed
1、木工棚內嚴禁吸煙。
1. Smoking is strictly prohibited in the carpentry shed.
2、木工棚內要設置一組滅火器,并放在比較明顯的部位,任何人不得挪用。
2. A group of fire extinguishers shall be set in the carpentry shed and placed in obvious parts, which shall not be misappropriated by anyone.
3、木工操作員要經常打掃木工棚,對刨花、木屑及時清理。
3. Woodworking operators shall often clean the wood shed and clean the shavings and sawdust in time.
4、木工要經常檢查使用的機械的電氣線路,檢查是否有發熱、短路、打火現象,如發現有此現象,應及時匯報,處理避免發生火災。
4. Woodworkers should often check the electrical circuit of the machinery used to check whether there is heating, short circuit and ignition. If this phenomenon is found, it should be reported in time and handled to avoid fire.
5、木工在下班前要鎖好電閘箱。
5. The carpenter should lock the switch box before leaving work.
6、加工好的成品、半成品木材要放在指定的位置,不得隨意亂扔亂放。
6. The processed finished and semi-finished wood shall be placed in the designated position and shall not be thrown or placed randomly.
7、木工區的負責人對本區的防火工作要認真負起責任,嚴格執行消防法規,發現可疑的情況及時排除,努力把消防的不隱患消滅在萌芽狀態中。
7. The person in charge of the woodworking area shall seriously take responsibility for the fire prevention work in the area, strictly implement the fire control regulations, eliminate suspicious situations in time, and strive to eliminate the unsafe hidden dangers of fire control in the bud.
- 上一篇:馬路臨邊護欄有哪些隱患?
- 下一篇:怎樣搭簡易木棚?